2022 Mako 236 CC
The MAKO® 236 CC is a versatile midsized offshore boat with a fine balance of creature comforts and hardcore fishability. Boat seating with removable backrests and drained storage beneath, as well as a center transom jump seat, keeps the family comfortable. Dual aft livewells and two 135-qt. fishboxes in the roomy aft area make fishing easy.
With the legendary MAKO overbuilt Deep V hull, it’s ready for virtually any offshore adventure. And it’s backed by MAKO Assurance—the best factory warranty in saltwater boats.
Basic Boat Info
Dimensions
Tanks
Other
-
Length:23' 4"
-
Beam: 8' 6"
-
Bottom Width: 6' 10"
-
Max. Recommended HP: 350 HP
-
Fuel Capacity: 136 gal.
-
Max. Person Capacity: 11 persons
-
Max. Person Weight: 2040 lbs.
-
Max. Person, Motor & Gear Weight: 3375 lbs.
-
Interior Depth: 32"
-
Transom Height At Center Line: 30"
-
Deadrise: 21 degrees
-
Draft: 18"
-
Dry Weight: 5010 lbs.
-
Average Hull Weight: 4100 lbs.
-
Average Package Weight: 7200 lbs.
-
Package Height w/T-top or Hardtop: 12' 0"
-
Storage Length: 32' 10"
Certification & Safety
-
Backed by MAKO® Assurance 5+Life—the best factory warranty in saltwater boats
-
NMMA® certified
-
Factory leak tested for hull, plumbing & fitting integrity
-
Horn
-
Flush-mounted Ritchie Navigation® Voyager compass
Console
-
Garmin® GPSMAP® 8610 chartplotter MFD w/Mercury® SmartCraft® digital gauges
-
Digital switching through multifunction displays
-
Custom anodized aluminum steering wheel w/knob
-
Dual-cylinder tilt hydraulic steering
-
Binnacle-mounted motor control(s)
-
Trim tab switches w/position indicator lights & auto retract
-
Powdercoated aluminum battery switch panel w/labels, main power shutoff, emergency parallel switch, removable knobs & voltage sensing relays (VSR)
-
Switch panel w/manual reset circuit breakers & illuminated switches
-
Easy access to helm electronics, instruments & switches
-
FUSION stereo w/4 lighted speakers
-
Integrated forward-console seat w/52-qt. (49.21 L) insulated, drained cooler
-
Integrated full-width fiberglass footrest w/non-skid surface
-
Tempered safety glass windshield w/aluminum frame
-
Marine-grade tinned wiring w/submersible connectors
-
Lockable, sealed glovebox
-
Portlight
-
Extra-large electronics mounting surface
-
2 console drink holders
-
12V DC outlet & dual USB ports
Leaning Post
-
Custom aluminum leaning post
-
Flip-up bolster
-
84-qt. (79.49 L) cooler below leaning post
-
Rod holders
Top
-
Canvas T-top
-
.25" (6.35 mm) aluminum backing-plate reinforcement for T-top
-
Electronics box
Head
-
Gelcoat-finished surface, wiring access hatches, battery switch panel & 6' (1.83 m) head room
Interior
-
Anchor locker
-
2-tone high-density marine-grade vinyl upholstery w/stain-resistant coating & composite substrates on seats
-
Port & starboard forward seats w/247-qt. (233.75 L) insulated storage below w/gravity overboard drainage
-
278-qt. (263.09 L) bow center in-deck storage compartment
-
Low-profile powdercoated aluminum bow rails
-
Self-bailing cockpit w/transom valves
-
2 port & 2 starboard gunnel-mounted rod holders
-
Port & starboard under-gunnel rod racks for 6 rods up to 7' (2.13 m) long
-
Freshwater shower w/pull-out spray head
-
Tuna/dive/boarding door w/hinged gate & stainless steel ring
-
Flush-folding, cushioned center transom jump seat
-
135-qt. (127.76 L) aft port & starboard in-deck fishboxes w/gravity drains & diaphragm pump
-
4 transom-mounted rod holders
-
2 aft 22-gal. (84.23 L) rounded livewells w/angled fills & friction-hinged acrylic lids
-
Aft starboard recessed tool & leader holder
-
Molded non-skid surfaces throughout
-
Bilge access hatch
-
360° coaming bolsters
-
Aft port & starboard coaming bolsters
-
Six 8" (20.32 cm) stainless steel, anti-rattle pop-up cleats
-
2 bow drink holders
Performance
-
Legendary dry-riding MAKO® hull
-
Aggressive deep V hull design
-
Performance lifting strakes
-
Recessed electric trim tabs
-
Factory-matched stainless steel propeller(s)
Construction & Exterior
-
Color: MAKO® Bone White gelcoat
-
Ring deck design for more usable interior space
-
100% composite construction
-
Coosa® Bluewater 100% composite transom core
-
Heavy-duty, fiberglass-encapsulated transom w/2" (5.08 cm) fiberglass-impregnated, high-density composite core
-
Hull/deck joint chemically sealed & bonded 360° & mechanically fastened every 6" (15.24 cm) w/316 stainless steel fasteners
-
1-piece molded fiberglass stringer grid w/integrated transom knee supports & gelcoat finish
-
Closed-cell foam-injected stringer grid for USCG-approved flotation
-
Heavy-duty rub rail w/stainless steel insert
-
Premium marine-grade stainless steel hardware & fasteners for corrosion resistance
-
Heavy duty extra thick, closed-molded hatch covers w/finished undersides & integrated gaskets
-
Aluminum backing plates for cleats & chocks
-
3-step, stowable dive ladder
-
Port & starboard molded-in swim platforms
-
Recessed, pull-out, telescoping boarding ladder
Electrical, Mechanical & Plumbing Systems
-
Automatic 2,000 GPH (7,570.82 LPH) bilge pump
-
1,100 GPH (4,163.95 LPH) livewell pump
-
Sea Chest keeps 3 pumps submerged for cooler running & longer life
-
Portable toilet
-
Pressurized raw water washdown pump
-
High-speed raw water intake
-
Transom w/freshwater washdown
-
Pressurized freshwater pump
-
6-gal. (22.71 L) freshwater tank
-
USCG-compliant navigation lights
-
2 cockpit courtesy lights & 1 head light
-
1 cranking battery per outboard
-
Dual battery rigging w/voltage sensitive relay (VSR) & emergency parallel switch
-
Marelon® corrosion-free seacocks on all below-water thru-hull fittings
-
Labeled, tinned-copper wiring for easy maintenance & protection in a marine environment
-
Pre-wired for optional anchor windlass
Optional Trailer
-
OPTIONAL tandem-axle EZ Loader® aluminum trailer available
-
NMMA® certified
-
DOT approved
-
Tandem-axle brakes
-
14" (35.56 cm) radial tires w/galvanized V5 wheels
-
Oil bath hubs
-
Leaf spring suspension
-
Heavy-duty winch w/nylon strap & safety strap
-
Stainless steel hardware
-
Galvanized steel components
-
LED lighting
-
LED marker lights
-
PVC loading guides
-
Galvanized fenders