2021 Mako 21 LTS

The MAKO® 21 LTS is an aggressive inshore predator that's ready for any challenge. Built to specs supplied by professional redfish anglers, it sports our patented RAPID PLANING SYSTEM™ (RPS) transom, which gets you on plane fast, increases motor efficiency and increases top-end speed by feeding air-free water directly into the prop.

The hull/deck is chemically bonded 360° and mechanically fastened every 6" with stainless fasteners for a lifetime of durability. And the 21 LTS comes standard with a tandem-axle aluminum trailer and Mercury® 150HP outboard.

  • Backed by MAKO® Assurance 5+Life—the best factory warranty in saltwater boats
  • RAPID PLANING SYSTEM™ (RPS) hull design for quick holeshots & sharp handling
  • 100% composite construction for a lifetime of rugged durability
  • Raised bow & aft casting decks w/diamond-patterned non-skid surface
  • 2 bow dry storage areas & bow port & starboard seats/storage boxes
  • Closed-molded fiberglass console w/2 rod holders & a removable 72-qt. (68.14 L) cooler/fishbox
  • Anodized aluminum helm seat frame w/4-rod rocket launcher & removable 94-qt. (88.96 L) cooler w/integrated seat cushion
  • Aft 30-gal. (113.56 L) aerated livewell w/Pro-Air® system
  • 8" (20.32 cm) hydraulic jack plate
  • Custom-matched aluminum trailer

Basic Boat Info

Make: Mako
Model: 21 LTS
Year: 2021
Condition: New
Category: Power
Construction: Fiberglass

Dimensions

Length: 21 ft
Length Overall: 21'5 ft
Beam: 8'4 ft
Min Draft: 1 ft
Dry Weight: 2735 lb
Deadrise: 16 deg

Tanks

Fuel Tank Capacity: 60 gal

Other

Maximum Number Of Passengers: 7
Boat Class: Bay Boats
More Info :
Additional Specs
  • Length:21' 5" 
  • Beam: 8' 4" 
  • Bottom width: 7' 4" 
  • Max. Recommended HP: 225 HP
  • Fuel Capacity: 60 gal.
  • Max. Person Capacity: 7 persons
  • Max. person weight: 1100 lbs.
  • Max. person, motor & gear weight: 2100 lbs.
  • Interior depth: 17" 
  • Transom height at center line: 27" 
  • Deadrise: 16 degrees
  • Draft: 12" 
  • Dry weight: 2735 lbs.
  • Average hull weight: 2100 lbs.
  • Average package weight: 3310 lbs.
  • Package height: 9' 1" 
  • Storage Length: 26' 6" 
Standard Features

Certification & Safety

  • Backed by MAKO® Assurance 5+Life—the best factory warranty in saltwater boats
  • NMMA® certified
  • Factory leak tested for hull, plumbing & fitting integrity
  • Fire extinguisher
  • Horn

Console

  • Elevated fiberglass console
  • Stainless steel destroyer-style steering wheel
  • SeaStar™ hydraulic steering
  • Analog tachometer, fuel gauge & water pressure gauge
  • Binnacle-mounted remote motor control w/power trim switch
  • Battery/gear storage
  • Removable forward-console 72-qt. (68.14 L) cooler/seat w/integrated cushion
  • Heavy-duty anodized aluminum grab rail
  • Contoured acrylic windscreen
  • Area to flush- & surface-mount additional electronics
  • 2 stainless steel drink holders w/drainage system
  • 2 console rod holders

Interior

  • Pre-wired for optional trolling motor
  • Anchor locker
  • 2-tone high-density marine-grade vinyl upholstery w/stain-resistant coating & composite substrates on seats
  • 360° fishability
  • 90-qt. (85.17 L) bow port & starboard boxes w/stainless steel lockable compression latches
  • 136-qt. (128.7 L) bow center storage compartment w/locking stainless steel compression latch
  • Anodized aluminum helm seat frame w/4-rod rocket launcher & removable 94-qt. (88.96 L) cooler w/integrated seat cushion
  • 2 large aft guttered & gasketed lock-down dry storage compartments
  • Closed-molded laminate hatch covers w/finished undersides
  • Lighted aft 30-gal. (113.56 L) livewell w/Pro-Air® aeration system
  • Closed-molded coaming boards
  • Bilge access hatch

Performance

  • Award-winning RAPID PLANING SYSTEM™ (RPS) transom for quicker holeshots, shallow-water abilities & better overall performance
  • 8" (20.32 cm) hydraulic jack plate
  • Factory-rigged w/matched propeller

Hardware & Accessories

  • Seven 6" (15.24 cm) stainless steel low-profile pull-up cleats (bow, fore, midship & aft)
  • Powder-coated transom reinforcement plate w/MAKO® logo
  • Reboarding step & stainless steel grab handle
  • Stainless steel & bronze thru-hull fittings
  • Stainless steel bow & stern eyes
  • Stainless steel fuel fill

Construction & Exterior

  • Color: MAKO® Bone White gelcoat
  • 100% composite construction
  • Encapsulated, fiberglass-infused transom w/high-density Coosa® Bluewater composite core
  • Molded, patterned non-skid casting platforms & cockpit sole
  • Console chemically bonded & mechanically fastened to deck w/.25" (6.35 mm) aluminum backing plates
  • Hull/deck joint chemically bonded & mechanically fastened w/stainless steel fasteners for strength & durability
  • Integrated 1-piece molded, gelcoated fiberglass stringer grid system w/gelcoat finish & fully injected w/closed-cell foam for USCG-approved flotation
  • High-density, fiberglass-infused trolling motor mounting core
  • Premium marine-grade stainless steel hardware & fasteners for corrosion resistance
  • Gelcoat finish on all bulkheads & compartment interiors
  • Self-bailing cockpit
  • Composite seat substrates
  • Heavy-duty rub rail

Electrical, Mechanical & Plumbing Systems

  • Integrated EPA-compliant fuel system w/rotocast corrosion-free fuel tank
  • 1,000 GPH (3,785.41 LPH) cartridge baitwell pump w/auxiliary inlet port
  • High-speed raw water pickup
  • USCG-compliant navigation lights
  • 2 cockpit courtesy lights
  • Interstate® cranking battery w/tray
  • 6-circuit ATO/ATC distribution fuse block
  • Marine-grade rocker switches w/push button breaker protection
  • Marine-grade tinned wiring w/submersible connectors
  • 12V outlet

Trailer

  • Custom tandem-axle trailer
  • Tandem-axle brakes
  • Sure Lube hubs
  • 1,000-lb. (453.59 kg) capacity tongue jack
  • Aluminum construction
  • Stainless steel hardware
  • Galvanized steel components
  • LED marker lights
  • PVC loading guides

Contact Us


More From Mako